Skip to main content
CalculazaEveryday calculations, made easier.

FREE ONLINE GEOMETRY CALCULATORS

Cone Lateral Surface Area

Multiply pi by the base radius and slant height.

INPUTS

Enter the details

Add the information requested below to get your result.

Your entries are used to produce the result in this browser.

How to use this tool

What does the Cone Lateral Surface Area do?

Multiply pi by the base radius and slant height. Enter the details above to see the result. The notes below explain the calculation method, any published formula, a worked example and important limitations.

When to use this tool

Multiply pi by the base radius and slant height. Have Base radius and Slant height ready before you start. Use one unit for all dimensions, and check whether the answer is a length, area or volume.

How to use the Cone Lateral Surface Area

  1. Enter the requested information: Base radius, Slant height.
  2. Check each value, date, text entry, or unit before continuing.
  3. Tap the main button to see your result.
  4. Review the result and use Copy result when you need to reuse it.
  5. Choose Clear to remove the entries and start again.

Formula and calculation method

Published formula: pi*radius*slant_height

Multiply pi by the base radius and slant height.

Cone Lateral Surface Area worked example

Radius 3 and slant height 5 gives about 47.124 square units.

Inputs required

  • Base radius
  • Slant height

Accuracy and limitations

Use the same measurement unit for every dimension. Area is expressed in square units and volume in cubic units unless the tool states otherwise. Use consistent units and check all input values before relying on the result. Results are generated by the method built into this tool. Rounding, input format, unit selection, and assumptions can affect the output. For important decisions, verify the result independently with an appropriate trusted source.

Part of 3D Shapes.

Sources and further reading

These external references support the standards, concepts or browser methods related to this tool. The exact assumptions used by this calculator are described above.

Frequently asked questions

What do I need to enter?

Start with Base radius, Slant height. Follow the field labels and keep units and formats consistent.

How is the result worked out?

Multiply pi by the base radius and slant height.

What should I double-check?

Use consistent units and check all input values before relying on the result.